24160 Spherical Roller Bearing Dimensions
The ENRO 24160 is a spherical roller bearing in the 24100 series, 300 × 500 × 200 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 24160
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 24160 is 300 × 500 × 200 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 2 versions: 24160W33, 24160K30/W33. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Cr 3750 kN, C0r 6300 kN (catalog reference values). Check the life at your load and speed.
Life calculator →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 2416024160 dimensions and ratings
| Bore diameterd | 300 mm |
|---|---|
| Outside diameterD | 500 mm |
| WidthB | 200 mm |
| Chamfer dimension, min.r min | 5 mm |
| Basic dynamic load ratingCr | 3750 kN |
| Basic static load ratingC0r | 6300 kN |
| Limiting speed, greasen grease | 700 rpm |
| Limiting speed, oiln oil | 1,000 rpm |
| Weight (approx.)m | 160.0 kg |
| Series | 24100 |
| Material | GCr15 / GCr15SiMn chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, brass |
| Origin | Made in China — Japanese-standard quality management |
Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
What “24160” means
- 241 — bearing type and dimension series code.
- 60 — bore code: code 60 × 5 = 300 mm.
24160 variants: 24160W33 / 24160K30/W33
| Order as | Meaning |
|---|---|
| 24160W33 | Lubrication groove and holes. Groove and holes in the outer ring for relubrication. |
| 24160K30/W33 | Tapered bore 1:30 + Lubrication groove and holes. Tapered bore, taper 1:30, used on wide series such as 240 and 241. Groove and holes in the outer ring for relubrication. |
Internal clearance (for example CN or C3) is stated on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 24160
How this size sits against its neighbours in the 24100 series and the other spherical roller bearing series with the same bore. Every figure is from the ENRO model table.
- The 24160 is the sixteenth of twenty-six sizes ENRO lists in the 24100 series, 300 × 500 × 200 mm.
- Next size down, the 24156, is 280 × 460 × 180 mm: twenty millimetres less bore, 40 mm less outside diameter, twenty millimetres narrower.
- Next size up, the 24164, is 320 × 540 × 218 mm: twenty millimetres more bore, 40 mm more outside diameter, eighteen millimetres wider.
- Seven other ENRO spherical roller bearings share the 300 mm bore: the 24060 (24000 series) is 460 × 160 mm, 40 mm less outside diameter and 40 mm narrower; the 23260 (23200 series) is 540 × 192 mm, 40 mm more outside diameter and eight millimetres narrower.
- The 24160 has a radial section of 100 mm ((D − d) / 2) on a 200 mm width, so its cross-section is wider than it is tall.
- Catalog reference values for the 24160: Cr 3750 kN, C0r 6300 kN, limiting speed 700 rpm with grease, 1,000 rpm with oil, weight 160.0 kg.
- Catalog dynamic load rating Cr is 3750 kN for the 24160 against 3100 kN for the 24156 (noticeably less, 650 kN or 17%) and 4250 kN for the 24164 (noticeably more, 500 kN or 13%).
- ENRO lists the 24160 in two versions: 24160W33, 24160K30/W33. In the same series, the 24156 is listed in the same two versions; the 24164 is listed in the same two versions.
24160 bearing dimensions: range and series
26 sizes in the 24100 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 24144 | 220 | 370 | 150 | 2120 | 3350 | 1,000 | 67.0 | |
| 24148 | 240 | 400 | 160 | 2400 | 3800 | 900 | 83.0 | |
| 24152 | 260 | 440 | 180 | 3000 | 4800 | 850 | 110.0 | |
| 24156 | 280 | 460 | 180 | 3100 | 5100 | 800 | 120.0 | |
| 24160 | 300 | 500 | 200 | 3750 | 6300 | 700 | 160.0 | This page |
| 24164 | 320 | 540 | 218 | 4250 | 7100 | 670 | 210.0 | |
| 24168 | 340 | 580 | 243 | 5300 | 8650 | 600 | 280.0 | |
| 24172 | 360 | 600 | 243 | 5600 | 9300 | 560 | 280 | |
| 24176 | 380 | 620 | 243 | On request | On request | On request | On request |
Catalog reference values. Full 24100 series table →
If the 24160 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 300 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 24160 | 24100 | 300 | 500 | 200 | 3750 | This page |
| 23860 | 23800 | 300 | 380 | 60 | 656 | |
| 23960 | 23900 | 300 | 420 | 90 | 1200 | |
| 23060 | 23000 | 300 | 460 | 118 | 2120 | |
| 24060 | 24000 | 300 | 460 | 160 | 2700 | |
| 23160 | 23100 | 300 | 500 | 160 | 3200 | |
| 22260 | 22200 | 300 | 540 | 140 | 3150 | |
| 23260 | 23200 | 300 | 540 | 192 | 3900 |
Same 500 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 24160: packing and marking
- Version
- Cylindrical or tapered bore (K, K30), with or without W33.
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 24160
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 24160Engineering tools built on our catalog data
24160 FAQ
What are the dimensions of the 24160 spherical roller bearing?
The 24160 has a bore (d) of 300 mm, an outside diameter (D) of 500 mm and a width (B) of 200 mm. Minimum chamfer r is 5 mm.
What load rating does the 24160 have?
Catalog reference values: basic dynamic load rating Cr 3750 kN, static rating C0r 6300 kN, limiting speed 700 rpm with grease. Values are confirmed per batch on request.
Which versions of the 24160 can I order?
ENRO lists the 24160 as 24160W33 (Lubrication groove and holes), 24160K30/W33 (Tapered bore 1:30 + Lubrication groove and holes). State the clearance group you need in your RFQ.
Is the ENRO 24160 interchangeable with other brands' 24160?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 24160 is dimensionally interchangeable with other brands' 24160 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
Which bearings have the same bore as the 24160?
In the ENRO range, 23860 (300 × 380 × 60 mm), 23960 (300 × 420 × 90 mm), 23060 (300 × 460 × 118 mm), 24060 (300 × 460 × 160 mm) share the 300 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 24160?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
Quote the 24160
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.