24800 Series Spherical Roller Bearings
ENRO lists 1 size in the 24800 series: 24892. Bore d 460 mm, outside diameter D 580 mm, width B 118 mm. Versions listed: W33 and K30/W33. Boundary dimensions follow the ISO 15 dimension series.
24800 series size table
Every 24800 size ENRO lists, sorted by bore. Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | r min mm | Cr kN | C0r kN | Grease rpm | Weight kg | Quote | Open model page |
|---|---|---|---|---|---|---|---|---|---|---|
| 24892 | 460 | 580 | 118 | 3 | 1790 | 4900 | 560 | 75 | Quote |
No model in this table matches. Widen the tolerance or use the size finder across both bearing types.
24800 series vs other spherical roller series at the same bore
Each row is one bore size d. Cells show model, D × B in mm and catalog Cr in kN; “On request” means the catalog value is pending confirmation. Series with no shared bore are not shown.
Click a model to open its full specification page.
| d mm | 24800 (this page) | 24000 | 23200 | 23100 | 24100 | 23000 | 23900 |
|---|---|---|---|---|---|---|---|
| 460 | 24892580 × 118Cr 1790 | 24092680 × 218Cr 5200 | 23292830 × 296Cr 8500 | 23192760 × 240Cr 6400 | 24192760 × 300Cr 8300 | 23092680 × 163Cr 3900 | 23992620 × 118Cr 2500 |
Spherical roller bearings only. Open a model page to see C0r, limiting speeds and weight.
About the 24800 series
- The 24800 series has one listed size, the 24892 at 460 × 580 × 118 mm.
- Against the 24000 series, which shares one bore size, the 24000 outside diameter is larger and the width larger at each shared bore: at d 460 mm the 24892 is 580 × 118 mm and the 24092 is 680 × 218 mm.
- Against the 23200 series, which shares one bore size, the 23200 outside diameter is larger and the width larger at each shared bore: at d 460 mm the 24892 is 580 × 118 mm and the 23292 is 830 × 296 mm.
- Catalog dynamic load ratings Cr run from 1790 kN (24892) to 1790 kN (24892).
- Versions in the 24800 series: W33 on every size, K30/W33 on every size.
Versions in this series
| Code | Meaning |
|---|---|
| W33 | Groove and holes in the outer ring for relubrication. |
| K30/W33 | Tapered bore, taper 1:30, used on wide series such as 240 and 241. Groove and holes in the outer ring for relubrication. |
24800 series FAQ
Which sizes are in the 24800 series?
ENRO lists one size in the 24800 series: the 24892, 460 × 580 × 118 mm.
Which versions are listed for the 24800 series?
W33 and K30/W33. W33: Groove and holes in the outer ring for relubrication. K30/W33: Tapered bore, taper 1:30, used on wide series such as 240 and 241. Groove and holes in the outer ring for relubrication. Not every size carries every version; the model page lists what is available.
How does the 24800 series differ from the 24000 series at the same bore?
At d 460 mm the 24892 (24800 series) is 580 × 118 mm and the 24092 (24000 series) is 680 × 218 mm: 100 mm more outside diameter and 100 mm wider. The two series share one bore size; the table above lists each one.
What load ratings are listed for the 24800 series?
Catalog dynamic load rating Cr runs from 1790 kN (24892) to 1790 kN (24892), with C0r, limiting speeds and weight on each model page. Values are confirmed per batch on request.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
Quote 24800 series spherical roller bearings
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.