24038 Spherical Roller Bearing Dimensions
The ENRO 24038 is a spherical roller bearing in the 24000 series, 190 × 290 × 100 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 24038
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 24038 is 190 × 290 × 100 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 2 versions: 24038W33, 24038K30/W33. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Cr 1120 kN, C0r 1800 kN (catalog reference values). Check the life at your load and speed.
Life calculator →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 2403824038 dimensions and ratings
| Bore diameterd | 190 mm |
|---|---|
| Outside diameterD | 290 mm |
| WidthB | 100 mm |
| Chamfer dimension, min.r min | 2.1 mm |
| Basic dynamic load ratingCr | 1120 kN |
| Basic static load ratingC0r | 1800 kN |
| Limiting speed, greasen grease | 1,400 rpm |
| Limiting speed, oiln oil | 2,000 rpm |
| Weight (approx.)m | 24.5 kg |
| Series | 24000 |
| Material | GCr15 / GCr15SiMn chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, brass |
| Origin | Made in China — Japanese-standard quality management |
Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
What “24038” means
- 240 — bearing type and dimension series code.
- 38 — bore code: code 38 × 5 = 190 mm.
24038 variants: 24038W33 / 24038K30/W33
| Order as | Meaning |
|---|---|
| 24038W33 | Lubrication groove and holes. Groove and holes in the outer ring for relubrication. |
| 24038K30/W33 | Tapered bore 1:30 + Lubrication groove and holes. Tapered bore, taper 1:30, used on wide series such as 240 and 241. Groove and holes in the outer ring for relubrication. |
Internal clearance (for example CN or C3) is stated on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 24038
How this size sits against its neighbours in the 24000 series and the other spherical roller bearing series with the same bore. Every figure is from the ENRO model table.
- The 24038 is the twelfth of twenty-eight sizes ENRO lists in the 24000 series, 190 × 290 × 100 mm.
- Next size down, the 24036, is 180 × 280 × 100 mm: ten millimetres less bore, ten millimetres less outside diameter, the same width.
- Next size up, the 24040, is 200 × 310 × 109 mm: ten millimetres more bore, twenty millimetres more outside diameter, nine millimetres wider.
- Seven other ENRO spherical roller bearings share the 190 mm bore: the 23938 (23900 series) is 260 × 52 mm, 30 mm less outside diameter and 48 mm narrower; the 23138 (23100 series) is 320 × 104 mm, 30 mm more outside diameter and four millimetres wider.
- The 24038 has a radial section of 50 mm ((D − d) / 2) on a 100 mm width, so its cross-section is wider than it is tall.
- Catalog reference values for the 24038: Cr 1120 kN, C0r 1800 kN, limiting speed 1,400 rpm with grease, 2,000 rpm with oil, weight 24.5 kg.
- Catalog dynamic load rating Cr is 1120 kN for the 24038 against 1060 kN for the 24036 (slightly less, 60 kN or 5%) and 1200 kN for the 24040 (slightly more, 80 kN or 7%).
- ENRO lists the 24038 in two versions: 24038W33, 24038K30/W33. In the same series, the 24036 is listed in the same two versions; the 24040 is listed in the same two versions.
24038 bearing dimensions: range and series
28 sizes in the 24000 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 24030 | 150 | 225 | 75 | 655 | 1040 | 2,000 | 10.50 | |
| 24032 | 160 | 240 | 80 | 750 | 1200 | 1,700 | 13.00 | |
| 24034 | 170 | 260 | 90 | 900 | 1460 | 1,600 | 17.50 | |
| 24036 | 180 | 280 | 100 | 1060 | 1730 | 1,500 | 23.00 | |
| 24038 | 190 | 290 | 100 | 1120 | 1800 | 1,400 | 24.5 | This page |
| 24040 | 200 | 310 | 109 | 1200 | 2120 | 1,300 | 31.0 | |
| 24044 | 220 | 340 | 118 | 1550 | 2600 | 1,200 | 40.0 | |
| 24048 | 240 | 360 | 118 | 1600 | 2700 | 1,100 | 43.0 | |
| 24052 | 260 | 400 | 140 | 2040 | 3450 | 1,000 | 65.5 |
Catalog reference values. Full 24000 series table →
If the 24038 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 190 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 24038 | 24000 | 190 | 290 | 100 | 1120 | This page |
| 23938 | 23900 | 190 | 260 | 52 | 414 | |
| 23038 | 23000 | 190 | 290 | 75 | 865 | |
| 23138 | 23100 | 190 | 320 | 104 | 1370 | |
| 24138 | 24100 | 190 | 320 | 128 | 1500 | |
| 22238 | 22200 | 190 | 340 | 92 | 1270 | |
| 23238 | 23200 | 190 | 340 | 120 | 1660 | |
| 22338 | 22300 | 190 | 400 | 132 | 2120 |
Same 290 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 24038: packing and marking
- Version
- Cylindrical or tapered bore (K, K30), with or without W33.
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 24038
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 24038Engineering tools built on our catalog data
24038 FAQ
What are the dimensions of the 24038 spherical roller bearing?
The 24038 has a bore (d) of 190 mm, an outside diameter (D) of 290 mm and a width (B) of 100 mm. Minimum chamfer r is 2.1 mm.
What load rating does the 24038 have?
Catalog reference values: basic dynamic load rating Cr 1120 kN, static rating C0r 1800 kN, limiting speed 1,400 rpm with grease. Values are confirmed per batch on request.
Which versions of the 24038 can I order?
ENRO lists the 24038 as 24038W33 (Lubrication groove and holes), 24038K30/W33 (Tapered bore 1:30 + Lubrication groove and holes). State the clearance group you need in your RFQ.
Is the ENRO 24038 interchangeable with other brands' 24038?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 24038 is dimensionally interchangeable with other brands' 24038 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
Which bearings have the same bore as the 24038?
In the ENRO range, 23938 (190 × 260 × 52 mm), 23038 (190 × 290 × 75 mm), 23138 (190 × 320 × 104 mm), 24138 (190 × 320 × 128 mm) share the 190 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 24038?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
Quote the 24038
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.