23084 Spherical Roller Bearing Dimensions
The ENRO 23084 is a spherical roller bearing in the 23000 series, 420 × 620 × 150 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 23084
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 23084 is 420 × 620 × 150 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 2 versions: 23084W33, 23084K/W33. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Catalog ratings for the 23084 are pending confirmation. Send your load and speed with the RFQ.
Request ratings →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 2308423084 dimensions and ratings
| Bore diameterd | 420 mm |
|---|---|
| Outside diameterD | 620 mm |
| WidthB | 150 mm |
| Chamfer dimension, min.r min | 5 mm |
| Basic dynamic load ratingCr | On request |
| Basic static load ratingC0r | On request |
| Limiting speed, greasen grease | On request |
| Limiting speed, oiln oil | On request |
| Weight (approx.)m | On request |
| Series | 23000 |
| Material | GCr15 / GCr15SiMn chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, brass |
| Origin | Made in China — Japanese-standard quality management |
Cr, C0r, limiting speeds and weight for the 23084 are catalog values pending confirmation and are shown as “On request”. ENRO does not estimate them; the confirmed values are sent with your quote.
What “23084” means
- 230 — bearing type and dimension series code.
- 84 — bore code: code 84 × 5 = 420 mm.
23084 variants: 23084W33 / 23084K/W33
| Order as | Meaning |
|---|---|
| 23084W33 | Lubrication groove and holes. Groove and holes in the outer ring for relubrication. |
| 23084K/W33 | Tapered bore 1:12 + Lubrication groove and holes. Tapered bore, taper 1:12, for adapter or withdrawal sleeve mounting. Groove and holes in the outer ring for relubrication. |
Internal clearance (for example CN or C3) is stated on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 23084
How this size sits against its neighbours in the 23000 series and the other spherical roller bearing series with the same bore. Every figure is from the ENRO model table.
- The 23084 is the twenty-first of twenty-five sizes ENRO lists in the 23000 series, 420 × 620 × 150 mm.
- Next size down, the 23080, is 400 × 600 × 148 mm: twenty millimetres less bore, twenty millimetres less outside diameter, two millimetres narrower.
- Next size up, the 23088, is 440 × 650 × 157 mm: twenty millimetres more bore, 30 mm more outside diameter, seven millimetres wider.
- Five other ENRO spherical roller bearings share the 420 mm bore: the 23984 (23900 series) is 560 × 106 mm, 60 mm less outside diameter and 44 mm narrower; the 23184 (23100 series) is 700 × 224 mm, 80 mm more outside diameter and 74 mm wider.
- The 23084 has a radial section of 100 mm ((D − d) / 2) on a 150 mm width, so its cross-section is wider than it is tall.
- ENRO lists the 23084 in two versions: 23084W33, 23084K/W33. In the same series, the 23080 is listed in the same two versions; the 23088 is listed in the same two versions.
23084 bearing dimensions: range and series
25 sizes in the 23000 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 23068 | 340 | 520 | 133 | 2700 | 4550 | 1,000 | 105.0 | |
| 23072 | 360 | 540 | 134 | 2750 | 4800 | 950 | 110 | |
| 23076 | 380 | 560 | 135 | 2900 | 5000 | 900 | 115 | |
| 23080 | 400 | 600 | 148 | 3250 | 5700 | 850 | 150 | |
| 23084 | 420 | 620 | 150 | On request | On request | On request | On request | This page |
| 23088 | 440 | 650 | 157 | 3850 | 6550 | 580 | 180 | |
| 23092 | 460 | 680 | 163 | 3900 | 6950 | 560 | 205 | |
| 23096 | 480 | 700 | 165 | 3900 | 6800 | 530 | 215.0 | |
| 230/500 | 500 | 720 | 167 | 4150 | 7800 | 500 | 225.0 |
Catalog reference values. Full 23000 series table →
If the 23084 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 420 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 23084 | 23000 | 420 | 620 | 150 | On request | This page |
| 23984 | 23900 | 420 | 560 | 106 | 2040 | |
| 24084 | 24000 | 420 | 620 | 200 | 4400 | |
| 23184 | 23100 | 420 | 700 | 224 | 5600 | |
| 24184 | 24100 | 420 | 700 | 280 | 7350 | |
| 23284 | 23200 | 420 | 760 | 272 | 7350 |
Same 620 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 23084: packing and marking
- Version
- Cylindrical or tapered bore (K, K30), with or without W33.
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 23084
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 23084Engineering tools built on our catalog data
23084 FAQ
What are the dimensions of the 23084 spherical roller bearing?
The 23084 has a bore (d) of 420 mm, an outside diameter (D) of 620 mm and a width (B) of 150 mm. Minimum chamfer r is 5 mm.
What load rating does the 23084 have?
Load ratings, speeds and weight for the 23084 are catalog values pending confirmation. No figure is shown until it is confirmed; ask for the values with your RFQ.
Which versions of the 23084 can I order?
ENRO lists the 23084 as 23084W33 (Lubrication groove and holes), 23084K/W33 (Tapered bore 1:12 + Lubrication groove and holes). State the clearance group you need in your RFQ.
Is the ENRO 23084 interchangeable with other brands' 23084?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 23084 is dimensionally interchangeable with other brands' 23084 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
Which bearings have the same bore as the 23084?
In the ENRO range, 23984 (420 × 560 × 106 mm), 24084 (420 × 620 × 200 mm), 23184 (420 × 700 × 224 mm), 24184 (420 × 700 × 280 mm) share the 420 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 23084?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
Quote the 23084
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.