23026 Spherical Roller Bearing Dimensions
The ENRO 23026 is a spherical roller bearing in the 23000 series, 130 × 200 × 52 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 23026
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 23026 is 130 × 200 × 52 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 2 versions: 23026W33, 23026K/W33. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Cr 430 kN, C0r 610 kN (catalog reference values). Check the life at your load and speed.
Life calculator →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 2302623026 dimensions and ratings
| Bore diameterd | 130 mm |
|---|---|
| Outside diameterD | 200 mm |
| WidthB | 52 mm |
| Chamfer dimension, min.r min | 2 mm |
| Basic dynamic load ratingCr | 430 kN |
| Basic static load ratingC0r | 610 kN |
| Limiting speed, greasen grease | 2,800 rpm |
| Limiting speed, oiln oil | 3,600 rpm |
| Weight (approx.)m | 6.00 kg |
| Series | 23000 |
| Material | GCr15 / GCr15SiMn chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, brass |
| Origin | Made in China — Japanese-standard quality management |
Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
What “23026” means
- 230 — bearing type and dimension series code.
- 26 — bore code: code 26 × 5 = 130 mm.
23026 variants: 23026W33 / 23026K/W33
| Order as | Meaning |
|---|---|
| 23026W33 | Lubrication groove and holes. Groove and holes in the outer ring for relubrication. |
| 23026K/W33 | Tapered bore 1:12 + Lubrication groove and holes. Tapered bore, taper 1:12, for adapter or withdrawal sleeve mounting. Groove and holes in the outer ring for relubrication. |
Internal clearance (for example CN or C3) is stated on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 23026
How this size sits against its neighbours in the 23000 series and the other spherical roller bearing series with the same bore. Every figure is from the ENRO model table.
- The 23026 is the third of twenty-five sizes ENRO lists in the 23000 series, 130 × 200 × 52 mm.
- Next size down, the 23024, is 120 × 180 × 46 mm: ten millimetres less bore, twenty millimetres less outside diameter, six millimetres narrower.
- Next size up, the 23028, is 140 × 210 × 53 mm: ten millimetres more bore, ten millimetres more outside diameter, one millimetre wider.
- Six other ENRO spherical roller bearings share the 130 mm bore: the 23126 (23100 series) is 210 × 64 mm, ten millimetres more outside diameter and twelve millimetres wider.
- The 23026 has a radial section of 35 mm ((D − d) / 2) on a 52 mm width, so its cross-section is wider than it is tall.
- Catalog reference values for the 23026: Cr 430 kN, C0r 610 kN, limiting speed 2,800 rpm with grease, 3,600 rpm with oil, weight 6.00 kg.
- Catalog dynamic load rating Cr is 430 kN for the 23026 against 355 kN for the 23024 (noticeably less, 75 kN or 17%) and 465 kN for the 23028 (slightly more, 35 kN or 8%).
- ENRO lists the 23026 in two versions: 23026W33, 23026K/W33. In the same series, the 23024 is listed in the same two versions; the 23028 is listed in the same two versions.
23026 bearing dimensions: range and series
25 sizes in the 23000 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 23022 | 110 | 170 | 45 | 310 | 440 | 3,400 | 3.80 | |
| 23024 | 120 | 180 | 46 | 355 | 510 | 3,200 | 4.20 | |
| 23026 | 130 | 200 | 52 | 430 | 610 | 2,800 | 6.00 | This page |
| 23028 | 140 | 210 | 53 | 465 | 680 | 2,600 | 6.55 | |
| 23030 | 150 | 225 | 56 | 510 | 750 | 2,400 | 7.85 | |
| 23032 | 160 | 240 | 60 | 585 | 880 | 2,400 | 9.70 | |
| 23034 | 170 | 260 | 67 | 710 | 1060 | 2,200 | 13.00 | |
| 23036 | 180 | 280 | 74 | 830 | 1250 | 2,000 | 17.00 | |
| 23038 | 190 | 290 | 75 | 865 | 1340 | 1,900 | 18.0 |
Catalog reference values. Full 23000 series table →
If the 23026 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 130 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 23026 | 23000 | 130 | 200 | 52 | 430 | This page |
| 24026 | 24000 | 130 | 200 | 69 | 540 | |
| 23126 | 23100 | 130 | 210 | 64 | 560 | |
| 24126 | 24100 | 130 | 210 | 80 | On request | |
| 22226 | 22200 | 130 | 230 | 64 | 735 | |
| 23226 | 23200 | 130 | 230 | 80 | 780 | |
| 22326 | 22300 | 130 | 280 | 93 | 1120 |
Same 200 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 23026: packing and marking
- Version
- Cylindrical or tapered bore (K, K30), with or without W33.
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 23026
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 23026Engineering tools built on our catalog data
23026 FAQ
What are the dimensions of the 23026 spherical roller bearing?
The 23026 has a bore (d) of 130 mm, an outside diameter (D) of 200 mm and a width (B) of 52 mm. Minimum chamfer r is 2 mm.
What load rating does the 23026 have?
Catalog reference values: basic dynamic load rating Cr 430 kN, static rating C0r 610 kN, limiting speed 2,800 rpm with grease. Values are confirmed per batch on request.
Which versions of the 23026 can I order?
ENRO lists the 23026 as 23026W33 (Lubrication groove and holes), 23026K/W33 (Tapered bore 1:12 + Lubrication groove and holes). State the clearance group you need in your RFQ.
Is the ENRO 23026 interchangeable with other brands' 23026?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 23026 is dimensionally interchangeable with other brands' 23026 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
Which bearings have the same bore as the 23026?
In the ENRO range, 24026 (130 × 200 × 69 mm), 23126 (130 × 210 × 64 mm), 24126 (130 × 210 × 80 mm), 22226 (130 × 230 × 64 mm) share the 130 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 23026?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
Quote the 23026
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.