22315 Spherical Roller Bearing Dimensions
The ENRO 22315 is a spherical roller bearing in the 22300 series, 75 × 160 × 55 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 22315
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 22315 is 75 × 160 × 55 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 2 versions: 22315W33, 22315K/W33. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Cr 440 kN, C0r 475 kN (catalog reference values). Check the life at your load and speed.
Life calculator →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 2231522315 dimensions and ratings
| Bore diameterd | 75 mm |
|---|---|
| Outside diameterD | 160 mm |
| WidthB | 55 mm |
| Chamfer dimension, min.r min | 2.1 mm |
| Basic dynamic load ratingCr | 440 kN |
| Basic static load ratingC0r | 475 kN |
| Limiting speed, greasen grease | 3,200 rpm |
| Limiting speed, oiln oil | 4,300 rpm |
| Weight (approx.)m | 5.55 kg |
| Series | 22300 |
| Material | GCr15 / GCr15SiMn chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, brass |
| Origin | Made in China — Japanese-standard quality management |
Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
What “22315” means
- 223 — bearing type and dimension series code.
- 15 — bore code: code 15 × 5 = 75 mm.
22315 variants: 22315W33 / 22315K/W33
| Order as | Meaning |
|---|---|
| 22315W33 | Lubrication groove and holes. Groove and holes in the outer ring for relubrication. |
| 22315K/W33 | Tapered bore 1:12 + Lubrication groove and holes. Tapered bore, taper 1:12, for adapter or withdrawal sleeve mounting. Groove and holes in the outer ring for relubrication. |
Internal clearance (for example CN or C3) is stated on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 22315
How this size sits against its neighbours in the 22300 series and the other spherical roller bearing series with the same bore. Every figure is from the ENRO model table.
- The 22315 is the eighth of twenty-eight sizes ENRO lists in the 22300 series, 75 × 160 × 55 mm.
- Next size down, the 22314, is 70 × 150 × 51 mm: five millimetres less bore, ten millimetres less outside diameter, four millimetres narrower.
- Next size up, the 22316, is 80 × 170 × 58 mm: five millimetres more bore, ten millimetres more outside diameter, three millimetres wider.
- Three other ENRO spherical roller bearings share the 75 mm bore: the 22215 (22200 series) is 130 × 31 mm, 30 mm less outside diameter and 24 mm narrower.
- The 22315 has a radial section of 42.5 mm ((D − d) / 2) on a 55 mm width, so its cross-section is wider than it is tall.
- Catalog reference values for the 22315: Cr 440 kN, C0r 475 kN, limiting speed 3,200 rpm with grease, 4,300 rpm with oil, weight 5.55 kg.
- Catalog dynamic load rating Cr is 440 kN for the 22315 against 400 kN for the 22314 (slightly less, 40 kN or 9%) and 490 kN for the 22316 (noticeably more, 50 kN or 11%).
- ENRO lists the 22315 in two versions: 22315W33, 22315K/W33. In the same series, the 22314 is listed in the same two versions; the 22316 is listed in the same two versions.
22315 bearing dimensions: range and series
28 sizes in the 22300 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 22311 | 55 | 120 | 43 | 270 | 280 | 4,300 | 2.45 | |
| 22312 | 60 | 130 | 46 | 310 | 335 | 4,000 | 3.10 | |
| 22313 | 65 | 140 | 48 | 340 | 360 | 3,800 | 3.75 | |
| 22314 | 70 | 150 | 51 | 400 | 430 | 3,400 | 4.55 | |
| 22315 | 75 | 160 | 55 | 440 | 475 | 3,200 | 5.55 | This page |
| 22316 | 80 | 170 | 58 | 490 | 540 | 3,000 | 6.60 | |
| 22317 | 85 | 180 | 60 | 550 | 620 | 2,800 | 7.65 | |
| 22318 | 90 | 190 | 64 | 610 | 695 | 2,600 | 9.05 | |
| 22319 | 95 | 200 | 67 | 670 | 765 | 2,600 | 10.50 |
Catalog reference values. Full 22300 series table →
If the 22315 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 75 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 22315 | 22300 | 75 | 160 | 55 | 440 | This page |
| 24015 | 24000 | 75 | 115 | 40 | 173 | |
| 22215 | 22200 | 75 | 130 | 31 | 212 | |
| 21315 | 21300 | 75 | 160 | 37 | 285 |
Same 160 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 22315: packing and marking
- Version
- Cylindrical or tapered bore (K, K30), with or without W33.
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 22315
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 22315Engineering tools built on our catalog data
22315 FAQ
What are the dimensions of the 22315 spherical roller bearing?
The 22315 has a bore (d) of 75 mm, an outside diameter (D) of 160 mm and a width (B) of 55 mm. Minimum chamfer r is 2.1 mm.
What load rating does the 22315 have?
Catalog reference values: basic dynamic load rating Cr 440 kN, static rating C0r 475 kN, limiting speed 3,200 rpm with grease. Values are confirmed per batch on request.
Which versions of the 22315 can I order?
ENRO lists the 22315 as 22315W33 (Lubrication groove and holes), 22315K/W33 (Tapered bore 1:12 + Lubrication groove and holes). State the clearance group you need in your RFQ.
Is the ENRO 22315 interchangeable with other brands' 22315?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 22315 is dimensionally interchangeable with other brands' 22315 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
Which bearings have the same bore as the 22315?
In the ENRO range, 24015 (75 × 115 × 40 mm), 22215 (75 × 130 × 31 mm), 21315 (75 × 160 × 37 mm) share the 75 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 22315?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
Quote the 22315
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.