6821 Bearing Dimensions
The ENRO 6821 is a deep groove ball bearing in the 6800 series, 105 × 130 × 13 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 6821
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 6821 is 105 × 130 × 13 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 3 versions: 6821, 6821-ZZ, 6821-2RS. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Catalog ratings for the 6821 are pending confirmation. Send your load and speed with the RFQ.
Request ratings →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 68216821 dimensions and ratings
| Bore diameterd | 105 mm |
|---|---|
| Outside diameterD | 130 mm |
| WidthB | 13 mm |
| Chamfer dimension, min.r min | 1 mm |
| Basic dynamic load ratingCr | On request |
| Basic static load ratingC0r | On request |
| Limiting speed, greasen grease | On request |
| Limiting speed, oiln oil | On request |
| Weight (approx.)m | On request |
| Series | 6800 |
| HS code | 8482.10 |
| Material | GCr15 chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, nylon |
| Clearance group | C0 (CN), C3 |
| Origin | Made in China — Japanese-standard quality management |
Cr, C0r, limiting speeds and weight for the 6821 are catalog values pending confirmation and are shown as “On request”. ENRO does not estimate them; the confirmed values are sent with your quote.
What “6821” means
- 68 — bearing type and dimension series code.
- 21 — bore code: code 21 × 5 = 105 mm.
6821 variants: 6821 / 6821-ZZ / 6821-2RS
| Order as | Meaning |
|---|---|
| 6821 | Open. No shields or seals. Lubricated in service by grease or oil. |
| 6821-ZZ | Metal shields, both sides. Non-contact steel shields. Low friction; keeps out larger particles. |
| 6821-2RS | Rubber seals, both sides. Contact rubber seals. Better protection against dust and water; slightly higher friction. |
State the clearance group per line on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 6821
How this size sits against its neighbours in the 6800 series and the other deep groove ball bearing series with the same bore. Every figure is from the ENRO model table.
- The 6821 is the twenty-second of twenty-eight sizes ENRO lists in the 6800 series, 105 × 130 × 13 mm.
- Next size down, the 6820, is 100 × 125 × 13 mm: five millimetres less bore, five millimetres less outside diameter, the same width.
- Next size up, the 6822, is 110 × 140 × 16 mm: five millimetres more bore, ten millimetres more outside diameter, three millimetres wider.
- Five other ENRO deep groove ball bearings share the 105 mm bore: the 6921 (6900 series) is 145 × 20 mm, fifteen millimetres more outside diameter and seven millimetres wider.
- The 6821 has a radial section of 12.5 mm ((D − d) / 2) on a 13 mm width, so its cross-section is wider than it is tall.
- ENRO lists the 6821 in three versions: 6821, 6821-ZZ, 6821-2RS. In the same series, the 6820 is listed adding snap ring groove with snap ring; the 6822 is listed in the same three versions.
6821 bearing dimensions: range and series
28 sizes in the 6800 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 6817 | 85 | 110 | 13 | 16.83 | 18.24 | 5,400 | 0.263 | |
| 6818 | 90 | 115 | 13 | 17.10 | 18.19 | 5,100 | 0.276 | |
| 6819 | 95 | 120 | 13 | 17.37 | 19.68 | 4,800 | 0.297 | |
| 6820 | 100 | 125 | 13 | 17.64 | 20.35 | 4,600 | 0.310 | |
| 6821 | 105 | 130 | 13 | On request | On request | On request | On request | This page |
| 6822 | 110 | 140 | 16 | 28.1 | 30.7 | 3,800 | 0.470 | |
| 6824 | 120 | 150 | 16 | 28.9 | 32.9 | 3,400 | 0.511 | |
| 6826 | 130 | 165 | 18 | 37.9 | 42.9 | 3,200 | 0.748 | |
| 6828 | 140 | 175 | 18 | 39.2 | 46 | 3,400 | 0.85 |
Catalog reference values. Full 6800 series table →
If the 6821 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 105 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 6821 | 6800 | 105 | 130 | 13 | On request | This page |
| 6921 | 6900 | 105 | 145 | 20 | 42.7 | |
| 6021 | 6000 | 105 | 160 | 26 | 72.50 | |
| 6221 | 6200 | 105 | 190 | 36 | 133.00 | |
| 6321 | 6300 | 105 | 225 | 49 | 184.00 | |
| 6421 | 6400 | 105 | 260 | 60 | 207.00 |
Same 130 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 6821: packing and marking
- Version
- Open, shielded (ZZ), sealed (2RS) or snap ring (NR).
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 6821
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 6821Engineering tools built on our catalog data
6821 FAQ
What are the dimensions of the 6821 deep groove ball bearing?
The 6821 has a bore (d) of 105 mm, an outside diameter (D) of 130 mm and a width (B) of 13 mm. Minimum chamfer r is 1 mm.
What load rating does the 6821 have?
Load ratings, speeds and weight for the 6821 are catalog values pending confirmation. No figure is shown until it is confirmed; ask for the values with your RFQ.
Which versions of the 6821 can I order?
ENRO lists the 6821 as 6821 (Open), 6821-ZZ (Metal shields, both sides), 6821-2RS (Rubber seals, both sides). State the clearance group you need in your RFQ.
Is the ENRO 6821 interchangeable with other brands' 6821?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 6821 is dimensionally interchangeable with other brands' 6821 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
What is the difference between 6821-ZZ and 6821-2RS?
6821-ZZ has metal shields, both sides: Non-contact steel shields. Low friction; keeps out larger particles. 6821-2RS has rubber seals, both sides: Contact rubber seals. Better protection against dust and water; slightly higher friction. Boundary dimensions are the same.
Which bearings have the same bore as the 6821?
In the ENRO range, 6921 (105 × 145 × 20 mm), 6021 (105 × 160 × 26 mm), 6221 (105 × 190 × 36 mm), 6321 (105 × 225 × 49 mm) share the 105 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 6821?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
What is the HS code for the 6821?
Deep Groove Ball Bearings are classified under HS Code 8482.10. Confirm the code with your customs broker.
Quote the 6821
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.