6811 Bearing Dimensions
The ENRO 6811 is a deep groove ball bearing in the 6800 series, 55 × 72 × 9 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 6811
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 6811 is 55 × 72 × 9 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 3 versions: 6811, 6811-ZZ, 6811-2RS. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Cr 7.92 kN, C0r 7.78 kN (catalog reference values). Check the life at your load and speed.
Life calculator →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 68116811 dimensions and ratings
| Bore diameterd | 55 mm |
|---|---|
| Outside diameterD | 72 mm |
| WidthB | 9 mm |
| Chamfer dimension, min.r min | 0.3 mm |
| Basic dynamic load ratingCr | 7.92 kN |
| Basic static load ratingC0r | 7.78 kN |
| Limiting speed, greasen grease | 8,300 rpm |
| Limiting speed, oiln oil | 9,500 rpm |
| Weight (approx.)m | 0.081 kg |
| Series | 6800 |
| HS code | 8482.10 |
| Material | GCr15 chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, nylon |
| Clearance group | C0 (CN), C3 |
| Origin | Made in China — Japanese-standard quality management |
Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
What “6811” means
- 68 — bearing type and dimension series code.
- 11 — bore code: code 11 × 5 = 55 mm.
6811 variants: 6811 / 6811-ZZ / 6811-2RS
| Order as | Meaning |
|---|---|
| 6811 | Open. No shields or seals. Lubricated in service by grease or oil. |
| 6811-ZZ | Metal shields, both sides. Non-contact steel shields. Low friction; keeps out larger particles. |
| 6811-2RS | Rubber seals, both sides. Contact rubber seals. Better protection against dust and water; slightly higher friction. |
State the clearance group per line on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 6811
How this size sits against its neighbours in the 6800 series and the other deep groove ball bearing series with the same bore. Every figure is from the ENRO model table.
- The 6811 is the twelfth of twenty-eight sizes ENRO lists in the 6800 series, 55 × 72 × 9 mm.
- Next size down, the 6810, is 50 × 65 × 7 mm: five millimetres less bore, seven millimetres less outside diameter, two millimetres narrower.
- Next size up, the 6812, is 60 × 78 × 10 mm: five millimetres more bore, six millimetres more outside diameter, one millimetre wider.
- Six other ENRO deep groove ball bearings share the 55 mm bore: the 6911 (6900 series) is 80 × 13 mm, eight millimetres more outside diameter and four millimetres wider.
- The 6811 has a radial section of 8.5 mm ((D − d) / 2) on a 9 mm width, so its cross-section is wider than it is tall.
- Catalog reference values for the 6811: Cr 7.92 kN, C0r 7.78 kN, limiting speed 8,300 rpm with grease, 9,500 rpm with oil, weight 0.081 kg.
- Catalog dynamic load rating Cr is 7.92 kN for the 6811 against 5.94 kN for the 6810 (substantially less, 1.98 kN or 25%) and 10.35 kN for the 6812 (substantially more, 2.43 kN or 31%).
- ENRO lists the 6811 in three versions: 6811, 6811-ZZ, 6811-2RS. In the same series, the 6810 is listed in the same three versions; the 6812 is listed in the same three versions.
6811 bearing dimensions: range and series
28 sizes in the 6800 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 6807 | 35 | 47 | 7 | 4.41 | 3.89 | 12,000 | 0.027 | |
| 6808 | 40 | 52 | 7 | 4.59 | 4.22 | 11,000 | 0.031 | |
| 6809 | 45 | 58 | 7 | 5.76 | 5.42 | 10,000 | 0.038 | |
| 6810 | 50 | 65 | 7 | 5.94 | 5.86 | 9,100 | 0.050 | |
| 6811 | 55 | 72 | 9 | 7.92 | 7.78 | 8,300 | 0.081 | This page |
| 6812 | 60 | 78 | 10 | 10.35 | 10.18 | 7,600 | 0.103 | |
| 6813 | 65 | 85 | 10 | 10.44 | 10.56 | 7,000 | 0.128 | |
| 6814 | 70 | 90 | 10 | 10.89 | 11.42 | 6,600 | 0.134 | |
| 6815 | 75 | 95 | 10 | 11.25 | 12.38 | 6,100 | 0.149 |
Catalog reference values. Full 6800 series table →
If the 6811 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 55 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 6811 | 6800 | 55 | 72 | 9 | 7.92 | This page |
| 6911 | 6900 | 55 | 80 | 13 | 14.40 | |
| 16011 | 16000 | 55 | 90 | 11 | 16.74 | |
| 6011 | 6000 | 55 | 90 | 18 | 25.47 | |
| 6211 | 6200 | 55 | 100 | 21 | 39.15 | |
| 6311 | 6300 | 55 | 120 | 29 | 64.35 | |
| 6411 | 6400 | 55 | 140 | 33 | 89.00 |
Same 72 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 6811: packing and marking
- Version
- Open, shielded (ZZ), sealed (2RS) or snap ring (NR).
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 6811
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 6811Engineering tools built on our catalog data
6811 FAQ
What are the dimensions of the 6811 deep groove ball bearing?
The 6811 has a bore (d) of 55 mm, an outside diameter (D) of 72 mm and a width (B) of 9 mm. Minimum chamfer r is 0.3 mm.
What load rating does the 6811 have?
Catalog reference values: basic dynamic load rating Cr 7.92 kN, static rating C0r 7.78 kN, limiting speed 8,300 rpm with grease. Values are confirmed per batch on request.
Which versions of the 6811 can I order?
ENRO lists the 6811 as 6811 (Open), 6811-ZZ (Metal shields, both sides), 6811-2RS (Rubber seals, both sides). State the clearance group you need in your RFQ.
Is the ENRO 6811 interchangeable with other brands' 6811?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 6811 is dimensionally interchangeable with other brands' 6811 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
What is the difference between 6811-ZZ and 6811-2RS?
6811-ZZ has metal shields, both sides: Non-contact steel shields. Low friction; keeps out larger particles. 6811-2RS has rubber seals, both sides: Contact rubber seals. Better protection against dust and water; slightly higher friction. Boundary dimensions are the same.
Which bearings have the same bore as the 6811?
In the ENRO range, 6911 (55 × 80 × 13 mm), 16011 (55 × 90 × 11 mm), 6011 (55 × 90 × 18 mm), 6211 (55 × 100 × 21 mm) share the 55 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 6811?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
What is the HS code for the 6811?
Deep Groove Ball Bearings are classified under HS Code 8482.10. Confirm the code with your customs broker.
Quote the 6811
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.