6012 Bearing Dimensions
The ENRO 6012 is a deep groove ball bearing in the 6000 series, 60 × 95 × 18 mm. Boundary dimensions follow the ISO 15 dimension series.
Three checks for the 6012
Most wrong replacements come from one of these. Each answer below comes from the ENRO model table.
Does the size match?
Measure bore, outside diameter and width. The 6012 is 60 × 95 × 18 mm. If one value differs, see the adjacent sizes below.
Adjacent sizes →Which version do you need?
ENRO lists 4 versions: 6012, 6012-ZZ, 6012-2RS, 6012-NR. Match the seals, shields or bore type of the old bearing.
Versions table →Is the load rating enough?
Cr 26.55 kN, C0r 22.27 kN (catalog reference values). Check the life at your load and speed.
Life calculator →Not sure which one you have? Send any part number and we'll match the dimensionally equivalent ENRO model.
Check my 60126012 dimensions and ratings
| Bore diameterd | 60 mm |
|---|---|
| Outside diameterD | 95 mm |
| WidthB | 18 mm |
| Chamfer dimension, min.r min | 1.1 mm |
| Basic dynamic load ratingCr | 26.55 kN |
| Basic static load ratingC0r | 22.27 kN |
| Limiting speed, greasen grease | 6,700 rpm |
| Limiting speed, oiln oil | 7,900 rpm |
| Weight (approx.)m | 0.412 kg |
| Series | 6000 |
| HS code | 8482.10 |
| Material | GCr15 chrome steel |
| Precision class | P0, P6 |
| Cage | Steel, nylon |
| Clearance group | C0 (CN), C3 |
| Origin | Made in China — Japanese-standard quality management |
Load ratings, limiting speeds and weights are catalog reference values. Values are confirmed per batch on request.
What “6012” means
- 60 — bearing type and dimension series code.
- 12 — bore code: code 12 × 5 = 60 mm.
6012 variants: 6012 / 6012-ZZ / 6012-2RS / 6012-NR
| Order as | Meaning |
|---|---|
| 6012 | Open. No shields or seals. Lubricated in service by grease or oil. |
| 6012-ZZ | Metal shields, both sides. Non-contact steel shields. Low friction; keeps out larger particles. |
| 6012-2RS | Rubber seals, both sides. Contact rubber seals. Better protection against dust and water; slightly higher friction. |
| 6012-NR | Snap ring groove with snap ring. Snap ring on the outer ring for axial location in the housing. |
State the clearance group per line on your RFQ. Suffix selector →
Print or save this table as PDF, or ask us to send the spec sheet with your quote.
Selection notes for the 6012
How this size sits against its neighbours in the 6000 series and the other deep groove ball bearing series with the same bore. Every figure is from the ENRO model table.
- The 6012 is the sixteenth of thirty-one sizes ENRO lists in the 6000 series, 60 × 95 × 18 mm.
- Next size down, the 6011, is 55 × 90 × 18 mm: five millimetres less bore, five millimetres less outside diameter, the same width.
- Next size up, the 6013, is 65 × 100 × 18 mm: five millimetres more bore, five millimetres more outside diameter, the same width.
- Six other ENRO deep groove ball bearings share the 60 mm bore: the 6912 (6900 series) is 85 × 13 mm, ten millimetres less outside diameter and five millimetres narrower; the 6212 (6200 series) is 110 × 22 mm, fifteen millimetres more outside diameter and four millimetres wider.
- The 6012 has a radial section of 17.5 mm ((D − d) / 2) on a 18 mm width, so its cross-section is wider than it is tall.
- Catalog reference values for the 6012: Cr 26.55 kN, C0r 22.27 kN, limiting speed 6,700 rpm with grease, 7,900 rpm with oil, weight 0.412 kg.
- Catalog dynamic load rating Cr is 26.55 kN for the 6012 against 25.47 kN for the 6011 (slightly less, 1.08 kN or 4%) and 27.45 kN for the 6013 (slightly more, 0.9 kN or 3%).
- ENRO lists the 6012 in four versions: 6012, 6012-ZZ, 6012-2RS, 6012-NR. In the same series, the 6011 is listed in the same four versions; the 6013 is listed in the same four versions.
6012 bearing dimensions: range and series
31 sizes in the 6000 series.
Click a model to open its full specification page.
| Model | d mm | D mm | B mm | Cr kN | C0r kN | Grease rpm | Weight kg | Open model page |
|---|---|---|---|---|---|---|---|---|
| 6008 | 40 | 68 | 15 | 15.12 | 11.04 | 9,500 | 0.190 | |
| 6009 | 45 | 75 | 16 | 18.90 | 14.50 | 8,700 | 0.241 | |
| 6010 | 50 | 80 | 16 | 19.62 | 15.94 | 8,000 | 0.261 | |
| 6011 | 55 | 90 | 18 | 25.47 | 20.36 | 7,300 | 0.381 | |
| 6012 | 60 | 95 | 18 | 26.55 | 22.27 | 6,700 | 0.412 | This page |
| 6013 | 65 | 100 | 18 | 27.45 | 24.19 | 6,200 | 0.439 | |
| 6014 | 70 | 110 | 20 | 34.20 | 29.67 | 5,800 | 0.608 | |
| 6015 | 75 | 115 | 20 | 35.55 | 32.16 | 5,400 | 0.649 | |
| 6016 | 80 | 125 | 22 | 42.75 | 38.40 | 5,000 | 0.872 |
Catalog reference values. Full 6000 series table →
If the 6012 is not quite right
Nearest ENRO sizes by bore and by series. Check the housing and shaft before switching.
Other series with a 60 mm bore
Click a model to open its full specification page.
| Model | Series | d | D | B | Cr kN | Open model page |
|---|---|---|---|---|---|---|
| 6012 | 6000 | 60 | 95 | 18 | 26.55 | This page |
| 6812 | 6800 | 60 | 78 | 10 | 10.35 | |
| 6912 | 6900 | 60 | 85 | 13 | 14.76 | |
| 16012 | 16000 | 60 | 95 | 11 | 18.00 | |
| 6212 | 6200 | 60 | 110 | 22 | 47.25 | |
| 6312 | 6300 | 60 | 130 | 31 | 73.80 | |
| 6412 | 6400 | 60 | 150 | 35 | 102.00 |
Same 95 mm outside diameter, different bore
Click a model to open its full specification page.
Specifications and boundary dimensions
Built to be checked, not believed. Boundary dimensions follow the ISO 15 dimension series. Ratings follow ISO 281 and clearance groups ISO 5753-1; every value on a model page can be checked against the standard.
Boundary dimensions
Boundary dimensions follow the ISO 15 dimension series. Same base number, same d, D and B.
Tolerances
Defines the tolerance classes for radial bearings. State the class you need on the RFQ.
Internal clearance
Defines the clearance groups C2, CN, C3, C4 and C5. State the group you need on the RFQ.
Rating life
Basis of the L10 basic rating life. Use it with the catalog Cr in our life calculator.
Japan-managed quality control
ENRO is a bearing brand for distributors and MRO buyers. Our QC protocol follows Japanese industrial quality practice. Our bearings are made in China.
100% outgoing inspection
Every ENRO bearing — not a sample, every unit — passes outgoing inspection before shipment.
Same color, same box, same label
Every order ships in the same color box with the same label, so repeat shipments match on the shelf.
How to order the 6012: packing and marking
- Version
- Open, shielded (ZZ), sealed (2RS) or snap ring (NR).
- Clearance group
- CN, C3 or another group. State it per line.
- Quantity per line
- Quantities per model and whether the order repeats.
- Marking options
- ENRO packing, OEM / private label or neutral packaging. State which one per line.
- Destination
- Port or country the order ships to.
Free samples are available.
Get a quote for a 6012
- Model or part number for each line
- Quantity per line
- Seal or shield, snap ring or bore type
- Clearance group, if not CN
- Destination port or country
We reply within 24 hours on business days.
Quote 6012Engineering tools built on our catalog data
6012 FAQ
What are the dimensions of the 6012 deep groove ball bearing?
The 6012 has a bore (d) of 60 mm, an outside diameter (D) of 95 mm and a width (B) of 18 mm. Minimum chamfer r is 1.1 mm.
What load rating does the 6012 have?
Catalog reference values: basic dynamic load rating Cr 26.55 kN, static rating C0r 22.27 kN, limiting speed 6,700 rpm with grease. Values are confirmed per batch on request.
Which versions of the 6012 can I order?
ENRO lists the 6012 as 6012 (Open), 6012-ZZ (Metal shields, both sides), 6012-2RS (Rubber seals, both sides), 6012-NR (Snap ring groove with snap ring). State the clearance group you need in your RFQ.
Is the ENRO 6012 interchangeable with other brands' 6012?
Boundary dimensions follow the ISO 15 dimension series. The ENRO 6012 is dimensionally interchangeable with other brands' 6012 of the same size. Confirm seal, clearance and cage requirements in your RFQ.
Where are ENRO bearings made?
ENRO bearings are Made in China by partner factories, under Japan-managed quality control. Every unit passes 100% outgoing inspection before shipment.
What is the difference between 6012-ZZ and 6012-2RS?
6012-ZZ has metal shields, both sides: Non-contact steel shields. Low friction; keeps out larger particles. 6012-2RS has rubber seals, both sides: Contact rubber seals. Better protection against dust and water; slightly higher friction. Boundary dimensions are the same.
Which bearings have the same bore as the 6012?
In the ENRO range, 6812 (60 × 78 × 10 mm), 6912 (60 × 85 × 13 mm), 16012 (60 × 95 × 11 mm), 6212 (60 × 110 × 22 mm) share the 60 mm bore. Outside diameter and width differ, so check the housing before switching.
Which clearance group should I order for the 6012?
CN (normal) suits most positions. C3 is common where the inner ring runs warmer than the outer ring, as in electric motors. Groups are defined in ISO 5753-1; state the one you need in your RFQ.
What is the HS code for the 6012?
Deep Groove Ball Bearings are classified under HS Code 8482.10. Confirm the code with your customs broker.
Quote the 6012
Send any part number and we'll match the dimensionally equivalent ENRO model. We reply within 24 hours on business days.